> Terms of Use     

HOME PRODUCTS TRACEABILITY Friendly LINK OVERSEAS AGENCY

HOME > PRODUCT Top > Calibrator for Running Metalwire Thermometer

RMR-01

 Calibrator For Running Metalwire Thermometer


  • RMR-01

    A temperature calibrator for RMT-01(Running MetalWire Thermometer).
    RMT-01 can be calibrator by touching abd running the K-thermocouple pulley on the copper plate heater which can be set the temperature.
    Total performance of RMT-01 at running can be checked easily.

Specifications

[Back]


name Calibrator for RMT-01
model RMR-01
CAD file dxf      pdf
Features
  • Calibration under a situation like actual measuring.
  • More accurate calibration can be done by using k-thermocouple calibrator together.
  • Accurate heater temperature control by feedbackof measured heater temperature with thermometer.
  • Temperature setting by 1℃ step.
  • Eeasy temterature setting by up/down switch.
Applicable model RMT-01
material for heater section Copper
thickness for heater section 0.5mm
Temperature range 0~150℃
Heater temperature accuracy Set temperature ±3℃(set at 100℃)
Temperature variation in heater ±3℃
power AC100V
Power
Consumption
200W(when heater on)
Ambient Temperature,Humidity 0~45℃/35~85%RH(No condensation)
Outside Demension 800(W)×75(H)×100(D)[mm]
Weight about 6kg


[Go to Top this page]

[Back]