Product information

RS-485 system

RS-485

RS-485 system makes it possible that setting, command and data management are done with pannel PC etc. by multipoint serial connection of Laser Micrometer, Surface Variation Detector, Capacitance Monitor or Joint Detector etc.

Features
  • The current measurement value of each measuring instrument is monitored by digital display. And it also can display graph.
  • Data from measurement start to end is saved in CSV file and quality control table is created from saved data.
  • The limit value of each measuring instrument can be set and displayed.
  • It counts the number of alarm output and displays it by each measuring instrument.
  • It has the distance correction function for the marking device, then accurate mark can be done to the defect portion.
  • The set values for each measuring instrument can be saved and managed with a name for each line.
  • It can control the outer diameter by the Dia. Control Unit.

Configuration diagram

It is PC or PLC、LDM series、CPM series、EM series from the left.
※Twisted pair 1 pair shielded cable is used.
※It is an interface that setting, command and data management with PC etc will be enabled with multipoint serial connection of our company's Lase Micrometer etc.

Interface

Operating screen 1 Normal PC version (Note: This is the screen under development) The contents displayed on the left are as follows.
It is LDM-110 (1 axis)、LDM-210 EXC (2 axis)、LDM-210 (1 axis)、EM-302、CPM-401 from the top.

This is an enlarged view of the parameter window of ch1
Three types of Lase Micrometer, eccentricity monitor, and capacitance monitor can be monitored at the same time.

Operating screen 2  27 inch touch panel PC version (Note: It is the screen under development)
This version performs position setting of the graph and parameter setting of each ch by touch operation. (using OS version Windows 8.1)
It is ch 1 ~ 5 from the left.
LDM-110、CPM-401、LDM-210、EM-302、LDM-210 EXC

  • This is an enlarged view of the parameter window of ch1

Contacts

「Contact」 or 「Technical consultation」etc. are accepted from here.

TEL.+81 42-645-8920

office hour/9:00〜17:30(Weekday)